LSI SERIES 600VA UPS is a line-interactive uninterruptible power system with modified sine wave output. It is designed to prevent impulse, surge, sag and power outage situation. And LSI Series 600VA provides the UPS output load with a reliable source.

 

Microprocessor control guarantees high reliability.
Equipped with Boost and Buck AVR to stabilize input voltage.
Built-in DC start function enables UPS to be started up without AC power supplied.
Smart RS-232 Communication Port with Free Download Software from the Internet .
Green Power Function for energy saving.
Auto restart while AC recovery.
Provides Modem/Phoneline Surge Protection.
Provides Overload Protection.

 

 

Product Specifications

CAPACITY	VA/W	600VA/360W
INPUT	Voltage	115VAC or 220/230/240VAC
	Voltage Range	85-140VAC / 162-290VAC
OUTPUT	Voltage	115VAC or 220/230/240VAC
	Voltage Regulation (Batt. Mode)	±10%
	Frequency	50HZ or 60Hz
	Frequency Regulation (Batt. Mode)	+/-1Hz
	Output Waveform	Modified Sinewave
BATTERY	Battery Type & Number	12V/7AH x 1pc
	Back up Time (at a PC load with PII + 15" monitor)	33minutes
	Recharge Time	8 hrs. to 90% after discharge
TRANSFER TIME	Typical	2-6ms
INDICATOR	AC Mode	Green Lighting
	Battery Mode	Green Flashing
AUDIBLE ALARM	Battery Mode	Sounding every 10 seconds
	Low Battery	Sounding every second
	Overload	Sounding every 0.5 second
	Battery Replacement	Sounding every 2 seconds
	Fault	Continuosly sounding
PROTECTION	Full Protection	Discharge, overcharge & overload protection
PHYSICAL	Dimension, DXWXH (mm)	330X100X140
	Net Weight (kgs)	6
ENVIRONMENT	Operating Environment	0-40C, 0-90% relative humidity (non-condensing)
	Noise Level	Less than 40dB
INTERFACE	Smart RS-232	Support windows 95/98/NT/2000/XP, Novell, and Linux

 

LSI SERIES 600VA