LSI SERIES 1000VA UPS is a line-interactive uninterruptible power system with modified sine wave output. It is designed to prevent impulse, surge, sag and power outage situation. And LSI 1000VA provides the UPS output load with a reliable source.

 

Microprocessor controlled guarantees high reliability.
Equipped with Boost and Buck AVR to stabilize input voltage.
Built-in DC start function enables UPS to be started up without AC power supplied.
Smart RS-232 Communication Port with Free Download Software from the Internet.
User-Replaceable Battery Design.
Auto charge even though UPS is off.
Auto restart while AC recovery.
Provides Modem/Phoneline surge protection.
Provides Discharge, Overcharge, and Overload Protection.

 

 

Product Specifications

CAPACITY	VA/W	1000VA/600W
INPUT	Voltage	115VAC or 220/230/240VAC
	Voltage Range	90-140VAC / 158-290VAC
OUTPUT	Voltage	115/120VAC or 220/240VAC
	Voltage Regulation (Batt. Mode)	±10%
	Frequency	50Hz or 60Hz
	Frequency Regulation (Batt. Mode)	±1Hz
	Output Waveform	Modified Sinewave
BATTERY	Battery Type & Number	12V/7AH x 2pcs
	Back up Time (PC w/ 15" monitor)	25minutes
	Recharge Time	8 hrs. to 90% after discharge
TRANSFER TIME	Typical	4-6ms
INDICATOR	AC Mode	The 1st green LED lighting, The 2nd to 5th green LEDs gradually Lighting indicating load level
	Battery Mode	The 1st green LED flashing The 2nd to 5th green gradually lighting indicating battery capacity
	Fault	Red LED lighting
AUDIBLE ALARM	Battery Mode	Sounding every 10 seconds
	Low Battery	Sounding every second
	Overload	Sounding every 0.5 second
	Fault	Continuosly sounding
PROTECTION	Full Protection	Discharge, Overcharge, and Overload Protection
PHYSICAL	Dimension, DXWXH (mm)	368.3X140.2X180.4
	Net Weight (kgs)	13.8
ENVIRONMENT	Operating Environment	0-40C, 0-90% relative humidity (non-condensing)
	Noise Level	AC Mode: Less than 40dB Backup Mode: Less than 45dB
INTERFACE	Smart RS-232	Support Windows Family, Linux, Mac

 

LSI SERIES 1000VA